|
|
|
Single
Switch. This element
switches currents on and off. Place up to five
switches in the simulation window. With the
Select
tool, you can move and rotate
switches, and wire
them to other objects. You attach wires to the
switch's two
nodes,
which are indicated by the
yellow
rectangles in Figures
1 and 2.
|
Fig.
1
|
Fig.
2
|
|
The default position of the switch is
off. You can flip the switch on or off in either
Run
mode or Stop
mode. To flip the switch in
Realistic
View, click on the metallic
handle (Figure 3) and drag it into the start (or stop)
position (Figure 4). To flip the switch in
Schematic View, just click in the
switch box (Figure 5).
|
