|
|
|
Battery.
This element provides energy for currents to flow.
Place up to four batteries in the simulation
window. With the Select
tool, you can move and rotate
batteries, and wire
them to other objects. You attach wires to the
battery's two
nodes,
which are indicated by the
yellow
rectangles in Figures
1 and 2. This element has an
alternative
view.
|
Fig.
1
|
Fig.
2
|
|
The default voltage of the
battery is 1.5 volts, the voltage of the common
D-type battery this element normally represents. A battery
connected to a 40 ohm bulb
carries the default standard
current.
The hidden property in the
Properties
Box is voltage. If
you reveal this property, you can reset the battery's
voltage.
|
